top riser
英 [tɒp ˈraɪzə(r)]
美 [tɑːp ˈraɪzər]
网络 顶冒口
双语例句
- Nonlinear dynamics response of deep-water production top tensioned riser under three different moving conditions is calculated using finite element analysis software.
通过实例对各条件下顶张式立管时域动态响应特性作了比较。 - Fatigue Damage Analysis of Vortex Induced Vibration for Deep-water Top Tension Riser
深水顶张力立管涡激振动疲劳损伤分析 - The finite element calculation of vibration response of deep-water production top tensioned riser
深水顶张式生产立管动力响应的有限元计算 - Research for Wall Thickness Design of a Top Tensioned Riser for a Tensioned Leg Platform
张力腿平台TTR立管壁厚设计研究 - In accordance with proportional solidification principle and limited feeding method, a series of top riser size is recommended to heavy castings.
本文根据均衡凝固原则、有限补缩的方法，推荐了厚大铸铁件的顶冒口尺寸系列。 - A Core-making Process Cured by Acetal Bottom Pouring Top Kiss Riser Gating System Casting Technology
乙缩醛工艺制芯的研究 - Generally, from the bottom to the top of the riser, the axial profiles of the averaged solids holdups become more uniform with the increased riser height.
气固提升管中，截面平均颗粒浓度沿轴向呈上稀下浓的不均匀分布，随床层高度增加轴向分布一般逐渐均匀； - From the riser bottom to the top, the local particle concentrations near the riser wall visibly decrease, while in riser center the particle concentrations only have a small change, leading to a decrease for the radial nonuniformity of particle concentrations.
从提升管底部向上，边壁区的局部颗粒浓度明显减小而中心区局部颗粒浓度变化较小，同时颗粒浓度的径向不均匀程度减小。 - In order to prevent casting defects, the combined feeding technology is designed using the proportional solidification theory, in which the top pouring, dispersed ingate intake, combined feeding of gating system and riser are adopted.
为了防止铸件产生铸造缺陷，运用均衡凝固理论，采用顶注、内浇道分散引入、浇注系统和冒口联合补缩工艺。 - Based on the permanent mold casting process of Al-piston, with top insulating riser feeding process, semi-permanent insulating sleeves matching permanent mold casting process of Al-piston have been designed.
根据金属型铸造铝活塞的工艺特点，采用顶部保温冒口补缩工艺，设计了能与铝活塞金属型铸造工艺相匹配的半永久型保温冒口套。 - Riser piles are often used in the development of beach sea oil field. Under actions of environment loads, displacement at top of the riser pile appears, and it will be harmful to riser and trestle if the displacement is considerably big.
在滩海油田开发过程中，经常需要设立立管桩，在环境荷载的作用下，立管桩顶部会发生位移，较大的位移对立管及栈桥的安全很不利，因此需要合理确定单桩的直径。 - The pressure dynamic transient equations for separator at the top of the riser reactor, main fractionator, separator for gas and gasoline and regenerator were proposed on the basis of the equation of state for ideal gas and the change of molecular rates through the vessels.
根据气体状态方程和容器物料平衡，得到了沉降器、分馏塔、分馏塔顶油气分离罐和再生器顶等部分的压力动态响应方程。 - The effect of drilling vessel motion, top tension and wall thickness of the riser joint on fatigue damage of drilling riser is mainly investigated.
重点研究了钻井船运动、顶部张紧力和隔水管单根壁厚对隔水管疲劳损伤的影响。 - The dynamic responses in the transverse and longitudinal directions for a top tension riser under combined internal solitary wave and non-uniform current were considered.
研究了顶张力立管在内孤立波与非均匀海流共同作用下的动力响应问题。 - The larger the top pre-tension, the lower the VIV-induced fatigue damage. The VIV-induced fatigue damage increases along with the riser outer diameter.
适当增加立管顶部预张力，可以减小涡激振动疲劳损伤。而立管外径较大时，相应的涡激振动疲劳损伤也较大。